ShopperGuide.dk418 stk. Webshops * 516.000+ Produkter

DK NO SE

<<<>>>ShopperGuide.dk > Produkter > 3DStore.dk...

3DStore.dk (67) 

https://3dstore.dk/

3DStore.dk forhandler alt indenfor 3D - både til begyndere og professionelle. 3D Printere, 3D Scannere, Filament til 3D Printere og reservedele. Forhandler af kendte mærker, såsom XYZprinting, Wanhao, Zortrax, ZYYX og Craftbot.

Gå til Netshop...
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Bahama Yellow - 1 kg
  • Produktid:2958
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Bondtech Extruder Mini for Wanhao i3
  • Produktid:2064
  • Beskrivelse:Bondtech Mini with Dual-Drive gears that grips the filament from both sides without any slippage or grinding as an upgrade kit for the Wanhao I3 printer. The smaller effective diameter of the drivegear will increase the torque by about 50% and also the
  • Nypris:799.00
  • Gl. pris:799.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Reservedele
  • Brand:
  • Produktnavn:Skraber
  • Produktid:1341
  • Beskrivelse:God til at fjerne print fra buildpladen
  • Nypris:50.00
  • Gl. pris:50.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Tangerine
  • Produktid:1339
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Tangerine
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior / Mini PLA Tough - 600g - Black
  • Produktid:6051
  • Beskrivelse:<div> <h3>High Rigidity & Tensile Strength</h3> Tough PLA offers tensile strengh and high rigidity. </div> <div> <h3>Better Impact Resistance</h3> Tough PLA can withstand a severe impact-load better than PLA. <div> <h3>Non-DEHP(DEHP FREE)</h3>
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Emerald Green - 1 kg
  • Produktid:7871
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Aztec Gold - 1 kg
  • Produktid:7868
  • Beskrivelse:Ifølge Spectrum Filaments motto,<em>“even the best 3D printer means nothing without a good filament”</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Duplicator i3 Plus mk2 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Auto-Level Inductive Sensor
  • Produktid:7816
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in Inductive Sensor for Duplicator i3 Plus mk2, Duplicator 6 Plus and Duplicator
  • Nypris:189.00
  • Gl. pris:189.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 Plus > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Zortrax Perforated build plate for M200 Plus
  • Produktid:7796
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in Perforated build plate compatible with Zortrax M200 Plus 3D printer. </div
  • Nypris:899.00
  • Gl. pris:899.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 Plus > M300 Plus > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Zortrax Hotend V3 for M200 Plus & M300 Plus
  • Produktid:7794
  • Beskrivelse:Heating block for precise filament extruding. Guarantees short heating-up time and efficient heat dissipation. Caps attached to the nozzle and bottom part of the hotend prevent dirt from getting inside and damaging the mechanism. A nozzle is included in t
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality CR-20 Pro
  • Produktid:7786
  • Beskrivelse:CR20 PRO, integrated module brand new creality3d printer with matrix automatic leveling, only needs 4+2 screws for quick installation, newly Cmagnetic sticker and imported teflon tube, printing size: 220*220*250mm You will be up and running in no time.
  • Nypris:3999.00
  • Gl. pris:3999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality CR-10S Pro
  • Produktid:7776
  • Beskrivelse:<div id="page" class="page-designer-skin <div id="content" class="official-content detail-page-content <div id="bd <div id="bd-inner <div id="extend" class="detail-page layout row-c2-s7 <div id="product-detail" class="col-main detail-wrap detail-main
  • Nypris:4999.00
  • Gl. pris:4999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA Pro - 1.75mm - Dark Grey - 1 kg
  • Produktid:7445
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Description</strong> Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.</strong> PLA Pro combines two desired features:
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 Plus mk2 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Magnetic Build Surface 220x220mm
  • Produktid:7430
  • Beskrivelse:<h3>Magnetic Build Surface Sheet for Wanhao Duplicator i3 Plus Mk2, D6 Plus</h3> Get this magnetic build surface and easy remove your 3D prints from the build platform of your Wanhao 3D printer. Product specifications: <ul> <li>Magnetic build surf
  • Nypris:219.00
  • Gl. pris:219.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-20 Pro > CREALITY 3D > Ender 3 > Reservedele
  • Brand:
  • Produktnavn:Creality 3D Ender-3 Pro / CR20 Pro Magnetic Build Surface
  • Produktid:7423
  • Beskrivelse:<h2>Original Creality 3D replacement 3D magnetic print surface for Ender-3 Pro</h2> If your 3D print surface for your Creality Ender-3 is worn or damaged you should get a newreplacement print surface. Contains: <ul> <li>1x Ender-3 Pro magnetic Bu
  • Nypris:149.00
  • Gl. pris:149.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Reservedele > Tilbehør
  • Brand:
  • Produktnavn:M6 brass nozzle 0,4mm
  • Produktid:11885
  • Beskrivelse:Compatible with: Prusa i3MK2/MK3, E3D V5-V6,Formbot Raptor</strong> 1 pcs 0,4 mm Brass nozzle
  • Nypris:59.00
  • Gl. pris:59.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality Ender-5
  • Produktid:11809
  • Beskrivelse:<ul> <li>More stable printing: The dual Y-axis motion control system drives the high-quality stable output of the two-sided timing belt, effectively avoiding the shock caused by printing.</li> <li>Built-in motherboard power supply: The wires are con
  • Nypris:3399.00
  • Gl. pris:3399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect WOOD - 1.75mm - 500 g - Natural Light
  • Produktid:11808
  • Beskrivelse:PrimaSELECTWOODis an outstanding and beautiful material - it smells like wood, looks like wood and feels like wood so surely it´s wood right? The answer is - almost.PrimaSELECTWOODis based on our PrimaSELECTPLA formula and has all of the benefits that
  • Nypris:250.00
  • Gl. pris:250.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect WOOD - 1.75mm - 500 g - Natural
  • Produktid:11807
  • Beskrivelse:PrimaSELECTWOODis an outstanding and beautiful material - it smells like wood, looks like wood and feels like wood so surely it´s wood right? The answer is - almost.PrimaSELECTWOODis based on our PrimaSELECTPLA formula and has all of the benefits that
  • Nypris:250.00
  • Gl. pris:250.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect WOOD - 1.75mm - 500 g - Green
  • Produktid:11797
  • Beskrivelse:PrimaSELECTWOODis an outstanding and beautiful material - it smells like wood, looks like wood and feels like wood so surely it´s wood right? The answer is - almost.PrimaSELECTWOODis based on our PrimaSELECTPLA formula and has all of the benefits that
  • Nypris:250.00
  • Gl. pris:250.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect FLEX - 2.85mm - 500 g - Black
  • Produktid:11671
  • Beskrivelse:PrimaSELECTFlexis a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need astrong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid b
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D End-stop switch
  • Produktid:4520
  • Beskrivelse:This replaces the limit switches for all three axis. It also as a filament detector sensor. This will fit CR-10 Small (300*300*400), CR-10 Medium/S4 (400*400*400), CR-10 Large/S5 (500*500*500) Printers
  • Nypris:39.00
  • Gl. pris:39.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D Brass Nozzle 0,4 mm
  • Produktid:4519
  • Beskrivelse:0,4 mm Brass nozzle for Creality Cr-10 series. 1 nozzle in the package.
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10s Tube connector Push-fitting (extruder)
  • Produktid:4518
  • Beskrivelse:Connector that holds the guide tube in place on the extruder.
  • Nypris:49.00
  • Gl. pris:49.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10 Complete hotend
  • Produktid:4517
  • Beskrivelse:This hotend is the stock hotend for CR-10s, CR-10-S4, and CR-10-S5 3D printers. Includes Bowden tube, thermistor, and heater cartridge.
  • Nypris:239.00
  • Gl. pris:239.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 4010 Fan
  • Produktid:4516
  • Beskrivelse:
  • Nypris:59.00
  • Gl. pris:59.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Power Supply
  • Produktid:4515
  • Beskrivelse:PSU for CR-10. 12 V, 30A
  • Nypris:299.00
  • Gl. pris:299.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D 42-40 Stepper Motor
  • Produktid:4513
  • Beskrivelse:Creality 3D Stepper Motor 42-40. The table bellow shows which size stepper motor that fits which axis on the different Creality 3D models: <table border="0" width="352" cellspacing="0" cellpadding="0<colgroup> <col /> <col span="4" /></colgroup> <tbo
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D 42-34 Stepper Motor
  • Produktid:4512
  • Beskrivelse:Creality 3D Stepper Motor 42-34. The table bellow shows which size stepper motor that fits which axis on the different Creality 3D models: <table border="0" width="352" cellspacing="0" cellpadding="0<colgroup> <col /> <col span="4" /></colgroup> <tbo
  • Nypris:189.00
  • Gl. pris:189.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D Screen for the CR-10s. (300/400/500)
  • Produktid:4511
  • Beskrivelse:Replacement screen for the CR-10s.(300/400/500)
  • Nypris:379.00
  • Gl. pris:379.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Duplicator i3 > Ender 3 > Reservedele > Universal > Wanhao
  • Brand:
  • Produktnavn:NEMA 17 Vibration Damper
  • Produktid:4500
  • Beskrivelse:Brug denne Nema 17 steppermotor dæmper til at reducere støjen fra dine NEMA 17 stepper motorer ganske betrækkeligt * Der kan forekomme kosmetiske fejl ioverfladen, dette har ingen betydning for brugen af dæmperen.
  • Nypris:35.00
  • Gl. pris:35.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Pastel Blue
  • Produktid:4483
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Performance HTPLA Carbon Fiber 2,85mm 500g
  • Produktid:2249
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div>Proto-pastas<strong id="yui_3_17_2_8_1419892303855_3005 High PerformanceCarbon Fiber </strong>HTPLA-CF</strong>combinesengineering-grade performance with the ease and environment
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Performance HTPLA V2 Carbon Fiber 1,75mm 500g
  • Produktid:2248
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div>Proto-pastas<strong id="yui_3_17_2_8_1419892303855_3005 High PerformanceCarbon Fiber </strong>HTPLA-CF</strong>combinesengineering-grade performance with the ease and environment
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 > Duplicator i3 Plus
  • Brand:
  • Produktnavn:Wanhao Bearing with bracket Di3 Plus/Di3 2.1
  • Produktid:2237
  • Beskrivelse:Fits to Di3 Plus and Di3 V2.1
  • Nypris:79.00
  • Gl. pris:79.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S
  • Brand:
  • Produktnavn:Wanhao D4 Filament guider
  • Produktid:2224
  • Beskrivelse:WanhaoD4 Filament guider passer til duplikator 4 / 4X / 4S. Længde: 630mm Diameter 5,76mm / 3,8mm
  • Nypris:54.00
  • Gl. pris:54.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Transparent Grøn
  • Produktid:641
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Transparent Grøn
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Nature
  • Produktid:639
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Nature
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Gul
  • Produktid:637
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Gul
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Sort
  • Produktid:635
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Sort
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Magnetic Iron PLA 1.75mm 125g
  • Produktid:603
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html <div> Proto-pasta Magnetic Iron PLA</strong> - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetismopens up a new world of practical appl
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Carbon Fiber PLA 1.75mm 125g
  • Produktid:593
  • Beskrivelse:<div class="product-description rte <div class="sqs-block html-block sqs-block-html" data-block-type="2 <div> <h1 id="yui_3_17_2_1_1425414714451_24288<span id="yui_3_17_2_1_1425414714451_24287Easy Like PLA, Stiff Like Carbon Fiber!</h1> Proto-pasta Ca
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Stainless Steel PLA 1.75mm 125g
  • Produktid:589
  • Beskrivelse:<div class="product-description rte <div class="sqs-block html-block sqs-block-html <div> <h1 id="yui_3_17_2_1_1425414714451_39181" class="text-align-centerPrints like plastic, polishes like metal!</h1> Proto-pasta Stainless Steel PLA</strong>is a de
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Conductive PLA 1.75mm 125g
  • Produktid:601
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html <div> <h1 id="yui_3_17_2_10_1425414714451_3150" class="text-align-centerElectrify Your 3D Prints - Print simple circuits and touch-sensitive devices!</h1> <p id="yui_3_17_2_10_1425414714451_3147<span id="
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Carbon Fiber PLA 1,75mm 500g
  • Produktid:581
  • Beskrivelse:<div class="product-description rte <div class="sqs-block html-block sqs-block-html" data-block-type="2 <div> <h1 id="yui_3_17_2_1_1425414714451_24288<span id="yui_3_17_2_1_1425414714451_24287Easy Like PLA, Stiff Like Carbon Fiber!</h1> Proto-pasta Ca
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Conductive PLA 1.75mm 500g
  • Produktid:585
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html <div> <h1 id="yui_3_17_2_10_1425414714451_3150" class="text-align-centerElectrify Your 3D Prints - Print simple circuits and touch-sensitive devices!</h1> <p id="yui_3_17_2_10_1425414714451_3147<span id="
  • Nypris:449.00
  • Gl. pris:449.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Magnetic Iron PLA 1.75mm 500g
  • Produktid:597
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html <div> Proto-pasta Magnetic Iron PLA</strong> - as its name implies - responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetismopens up a new world of practical appl
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta Stainless Steel PLA 1.75mm 500g
  • Produktid:595
  • Beskrivelse:<div class="product-description rte <div class="sqs-block html-block sqs-block-html <div> <h1 id="yui_3_17_2_1_1425414714451_39181" class="text-align-centerPrints like plastic, polishes like metal!</h1> Proto-pasta Stainless Steel PLA</strong>is a de
  • Nypris:449.00
  • Gl. pris:449.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect PVA+ - 2.85mm - 500 g - Natural
  • Produktid:483
  • Beskrivelse:PrimaSELECTPVA+(polyvinyl alcohol) is a water soluble material that´s most often used as a support material. PVA printstranslucent with a slightly yellow tint. It is most often used on 3D printers with dual extruders,with one extruder printing a pri
  • Nypris:350.00
  • Gl. pris:350.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect PVA+ - 1.75mm - 500 g - Natural
  • Produktid:482
  • Beskrivelse:PrimaSELECTPVA+(polyvinyl alcohol) is a water soluble material that´s most often used as a support material. PVA printstranslucent with a slightly yellow tint. It is most often used on 3D printers with dual extruders,with one extruder printing a pri
  • Nypris:350.00
  • Gl. pris:350.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:NinjaFlex SemiFlex Snow White 1.75mm
  • Produktid:479
  • Beskrivelse:New from NinjaFlex! Say hi to the latest addition in the NinjaFlex family. This is SemiFlex. just like the orginal, SemiFlex boasts flexibility, strenght and reliability for your 3D printing projects. SemiFlex is slightly more rigid to expand your prin
  • Nypris:350.00
  • Gl. pris:350.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:NinjaFlex SemiFlex Midnight Black 3mm
  • Produktid:231
  • Beskrivelse:Nyt fra NinjaFlex! Say hi to the latest addition in the NinjaFlex family. This is SemiFlex. just like the orginal, SemiFlex boasts flexibility, strenght and reliability for your 3D printing projects. SemiFlex is slightly more rigid to expand your print
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Ukategoriseret
  • Brand:
  • Produktnavn:DEMO VARE
  • Produktid:261
  • Beskrivelse:
  • Nypris:1.00
  • Gl. pris:1.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:NinjaFlex SemiFlex Midnight Black 1.75mm
  • Produktid:234
  • Beskrivelse:New from NinjaFlex! Say hi to the latest addition in the NinjaFlex family. This is SemiFlex. just like the orginal, SemiFlex boasts flexibility, strenght and reliability for your 3D printing projects. SemiFlex is slightly more rigid to expand your prin
  • Nypris:350.00
  • Gl. pris:350.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Performance HTPLA - Aromatic Coffee 2,85mm 500g
  • Produktid:2251
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div>We drink plenty ofcaffeine as we push as hard as we can to bring you new Proto-pasta materials. After all, its a Northwest tradition andcaffeine fuels innovation, right? We took t
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao MK10 Drive Gear i3
  • Produktid:1406
  • Beskrivelse:Drive Gear der passer til MK10 extruder. passer til extruder på Duplicator i3.
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Creator Pro > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss MK10 .4 mm All Metal Hotend Kit
  • Produktid:1398
  • Beskrivelse:This is an all metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle</strong>. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless st
  • Nypris:264.00
  • Gl. pris:264.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10S Pro Build Surface Sticker 310x320mm
  • Produktid:14092
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:209.00
  • Gl. pris:209.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Tape > Universal
  • Brand:
  • Produktnavn:Polyimide Tape Heat Resistant Extra Superwide 200mm x 32m
  • Produktid:14059
  • Beskrivelse:<h2>Buy Heat Resistant Extra Super wide Polyimide Tape - 200 mm x 32m</h2> An "ExtraWide" roll of our of Polyimide tape! 200 mm wide by 30 Meters long! Its all the great features of Polyimide tape in an extra-wide roll that will cover 3D print build su
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 Plus > M300 Plus > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Zortax M200 Plus M300 Plus Extruder PCB
  • Produktid:14012
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:259.00
  • Gl. pris:259.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10S Pro CR-X Relay
  • Produktid:14010
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:189.00
  • Gl. pris:189.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > M300 > Micro Swiss > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Micro Swiss - Plated Wear Resistant Nozzle for Zortrax M200 / M300 - 0.60mm
  • Produktid:14008
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10S Pro Heating Cartridge
  • Produktid:14006
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10S Pro Extruder PCB
  • Produktid:14003
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="container main-content <section id="product" class="content-wrap <
  • Nypris:299.00
  • Gl. pris:299.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10S Pro Conductive Auto-Level Sensor
  • Produktid:14000
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in Conductive Auto-Level Sensor for the CR-10S Pro. </div> </div> </div> <
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Zortrax
  • Brand:
  • Produktnavn:Zortrax M300 Dual
  • Produktid:13591
  • Beskrivelse:<div class="short-description <h3>Zortrax M300 Dual Main Features</h3> <div class="row m-0 <div class="col-12 brochure-list-column list <ul> <li>Works in the LPD Plus dual-extrusion technology</li> <li>Has a 265x265x300 mm workspace</li> <li>
  • Nypris:41999.00
  • Gl. pris:41999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Zortrax
  • Brand:
  • Produktnavn:Zortrax M200
  • Produktid:706
  • Beskrivelse:[section label="Plug & Create Section" bg_color="rgb(245, 245, 245)" padding="60px" height="200px" border="1px 0px 0px 0px" border_color="rgb(235, 235, 235)"] [row v_align="middle"] [col span="6" span__sm="12" divider="0" align="left"] <h2 class="u
  • Nypris:13299.00
  • Gl. pris:14999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Pure Black
  • Produktid:770
  • Beskrivelse:<span style="font-size: largeZ-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept model
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Pure White
  • Produktid:773
  • Beskrivelse:<span style="font-size: largeZ-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept model
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Sky Blue
  • Produktid:826
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Blue
  • Produktid:838
  • Beskrivelse:<span style="font-size: largeZ-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept model
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Red
  • Produktid:840
  • Beskrivelse:<span style="font-size: largeZ-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept model
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Ukategoriseret
  • Brand:
  • Produktnavn:TESTVARE
  • Produktid:1102
  • Beskrivelse:
  • Nypris:1.00
  • Gl. pris:1.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:PTFE Thermal Barrier Liner for MK10 Extruder
  • Produktid:1066
  • Beskrivelse:PTFE Thermal Barrier Liner for MK10 Extruder
  • Nypris:37.00
  • Gl. pris:37.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10S
  • Produktid:4360
  • Beskrivelse:<div id="page" class="page-designer-skin <div id="content" class="official-content detail-page-content <div id="bd <div id="bd-inner <div id="extend" class="detail-page layout row-c2-s7 <div id="product-detail" class="col-main detail-wrap detail-main
  • Nypris:4499.00
  • Gl. pris:4499.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Software
  • Brand:
  • Produktnavn:Simplify3D
  • Produktid:1152
  • Beskrivelse:ALL-IN-ONE 3D PRINTING SOFTWARE The Simplify3D Software suite contains everything you need to begin making parts on your new 3D printer. Import your digital models, select your pre-configured settings, and generate your G-Code instructions in seconds. Vi
  • Nypris:1299.00
  • Gl. pris:1299.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Tape > Universal
  • Brand:
  • Produktnavn:Polyimide Tape Heat Resistant Wide 100mm x 32m
  • Produktid:1274
  • Beskrivelse:<span id="result_box" class="" lang="da<span class="hpsEn <span class="hps"Ekstra <span class="hpsBred" <span class="hpsrulle <span class="hpsKapton <span class="hpstape <span class="hps100mm <span class="hpsbred og <span class="hps32 meter <span class="h
  • Nypris:250.00
  • Gl. pris:250.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Zortrax Extruder Cable
  • Produktid:4317
  • Beskrivelse:The new version of the Extruder Cable works perfectly fine with all M200 versions. *The adapter in the picture is NOT included.
  • Nypris:549.00
  • Gl. pris:549.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Blue
  • Produktid:4287
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D
  • Brand:
  • Produktnavn:Raise3D Extruder Side Cooling Fan
  • Produktid:4238
  • Beskrivelse:Extruder Side Cooling Fan for the Raise3D N2-series and Pro2-series. 35x35x10mm, 12V - 0.14A.
  • Nypris:99.00
  • Gl. pris:99.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Yellow
  • Produktid:4220
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Hvid
  • Produktid:1289
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Hvid
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Klar Rød
  • Produktid:1288
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Klar Rød
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Green
  • Produktid:2156
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Side covers for Zortrax M200
  • Produktid:1415
  • Beskrivelse:Side covers for Zortrax M200
  • Nypris:699.00
  • Gl. pris:699.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Zortrax Thermocoupler + Heater
  • Produktid:1408
  • Beskrivelse:Set of one thermocoupler and one heater for hotend. Fits the M200 and M300 printers
  • Nypris:179.00
  • Gl. pris:179.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PETG - 1,75mm - 800g - Black
  • Produktid:2147
  • Beskrivelse:We’d like to introduce the new material available in Zortrax offer - the Z-PETG. Material highly resistant to salts, acids and alkalis which makes it ideal for creating mechanical parts exposed to chemicals. Z-PETG is physically durable, great for
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:EasyPrint PETG Value Pack - 1.75mm - 4x 500 g (Total 2 kg)
  • Produktid:8659
  • Beskrivelse:EasyPrint VALUE pack contains 4 x 500 gram spools. Clear, Transparent Rose, Transparent Light Blue, Transparent Green Spool fully compatible with all Flashforge printers, fits inside printers like Finder, Dreamer etc...Adapter included so you can chang
  • Nypris:425.00
  • Gl. pris:425.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Android Green
  • Produktid:1423
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Cool Grey
  • Produktid:1424
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Green
  • Produktid:1425
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Orange
  • Produktid:1426
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Warm Grey
  • Produktid:1427
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Flashforge
  • Brand:
  • Produktnavn:Flashforge Creator Pro 2016 3D Printer
  • Produktid:1718
  • Beskrivelse:The new and improved Creator Pro with dual extrusion technology. (2016 model or internally also called Creator 5) A great printer got even better. Key features and improvements: - New heat-resistant metal platform supports replace plastic supports
  • Nypris:7399.00
  • Gl. pris:9495.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Glass plate with clips
  • Produktid:1824
  • Beskrivelse:Glas plade, der passer til buildpladen på duplikatorer I3 Og I3 Plus. 200 x 215 mm. clips inkluderet
  • Nypris:149.00
  • Gl. pris:149.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Printafix
  • Brand:
  • Produktnavn:APRINTAPRO PrintaFix Basic 100ml
  • Produktid:1791
  • Beskrivelse:<div class="page" title="Page 1 <div class="layoutArea <div class="column APRINTAPRO PrintaFix Basic - En ny simple måde at få fastholde printet til beden. </div> Ønsker du en simple løsning på at printet ikke vil sidde ordenligt til print fladen
  • Nypris:99.00
  • Gl. pris:99.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Hot end nozzle mounting block
  • Produktid:1819
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in Wanhao Hot end nozzle mounting block. Fits to MK10 extruder. </div> </div
  • Nypris:99.00
  • Gl. pris:99.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - MK10 All Metal Hotend with SLOTTED block for Wanhao i3 0.4mm
  • Produktid:1878
  • Beskrivelse:All Metal Hotend w/ SLOTTED cooling for Wanhao i3 This is Micro Swiss All Metal Hotend kit withredesigned cooling block for Wanhao i3 with the following improvements: <ul> <li>Slotted Clamping system</li> <li>No set screw to ding and damage the
  • Nypris:430.00
  • Gl. pris:430.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Printafix
  • Brand:
  • Produktnavn:APRINTAPRO PrintaFix Basic Sample
  • Produktid:1842
  • Beskrivelse:<div class="large-10 columns <div id="section-description" class="entry-content <div class="page" title="Page 1 <div class="layoutArea <div class="column APRINTAPRO PrintaFix Basic Sample - En ny simple måde at få fastholde printet til beden.
  • Nypris:0.00
  • Gl. pris:0.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss CNC Machined Lever for Wanhao i3 extruder
  • Produktid:1880
  • Beskrivelse:This is a replacement lever for Wanhao i3 /4s and all of itsclones. Lever is CNC machined from 6061 billet aluminum, with weight reduction features. It will replace a stock plastic lever that has tendency to warp over time from heat and force. This i
  • Nypris:195.00
  • Gl. pris:195.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Heatingboard
  • Produktid:1832
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in Wanhao Duplicator i3 Heatingboard. </div> </div> </div> </section></div
  • Nypris:244.00
  • Gl. pris:244.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Creator Pro > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - 0.2 mm Nozzle for MK10 Allmetal Hotend Kit
  • Produktid:1884
  • Beskrivelse:<div id="articleText This is Micro SwissMK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made fro
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Creator Pro > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - 0.3 mm Nozzle for MK10 Allmetal Hotend Kit
  • Produktid:1886
  • Beskrivelse:<div id="articleText This is Micro SwissMK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made fro
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Dreamer
  • Brand:
  • Produktnavn:Flashforge Extruder fan for Dreamer
  • Produktid:2041
  • Beskrivelse:
  • Nypris:99.00
  • Gl. pris:99.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 6
  • Brand:
  • Produktnavn:Wanhao Acrylic side and top cover to Duplicator 6
  • Produktid:2018
  • Beskrivelse:Acrylic side and top cover for Duplicator 6
  • Nypris:889.00
  • Gl. pris:889.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Inkspire > Zortrax
  • Brand:
  • Produktnavn:Zortrax Resin Tank for Inkspire
  • Produktid:10549
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="short-description <div class="short-description <div class="short
  • Nypris:259.00
  • Gl. pris:259.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Inkspire > Zortrax
  • Brand:
  • Produktnavn:Zortrax Platform for Inkspire
  • Produktid:10524
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="short-description <div class="short-description <div class="short
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Inkspire > Zortrax
  • Brand:
  • Produktnavn:Zortrax LCD Screen Set for Inkspire
  • Produktid:10522
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="short-description <div class="short-descriptionLCD Screen Set for
  • Nypris:1359.00
  • Gl. pris:1359.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Inkspire > Zortrax
  • Brand:
  • Produktnavn:Zortrax FEP Film Set for Inkspire
  • Produktid:10520
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <div class="short-descriptionSet of 4 FEP Films for Zortrax Inkspire.</div> </
  • Nypris:259.00
  • Gl. pris:259.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Elektronik
  • Brand:
  • Produktnavn:TMC2208 Stepper Driver
  • Produktid:10432
  • Beskrivelse:TMC2208 Stepper Driver
  • Nypris:109.00
  • Gl. pris:109.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Elektronik
  • Brand:
  • Produktnavn:TMC2130 V1.1 Stepper Driver
  • Produktid:10431
  • Beskrivelse:TMC2130 V1.1 Stepper Driver
  • Nypris:169.00
  • Gl. pris:169.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Elektronik
  • Brand:
  • Produktnavn:TMC2130 V1.0 Stepper Driver
  • Produktid:10418
  • Beskrivelse:TMC2130 V1.0 Stepper Driver
  • Nypris:159.00
  • Gl. pris:159.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Elektronik
  • Brand:
  • Produktnavn:TMC2100 Stepper Driver
  • Produktid:10216
  • Beskrivelse:TMC2100 Stepper Driver.
  • Nypris:149.00
  • Gl. pris:149.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10 mini > Cr-10s > Cr-20 Pro > CREALITY 3D > Ender 3
  • Brand:
  • Produktnavn:MK7/MK8/MK9 Silicone Cover
  • Produktid:10192
  • Beskrivelse:<span id="productTitle" class="a-size-largeSilicone Coverfor hot-end heat block. Fits the Creality CR10-series, CR20-series, Ender-3-series.
  • Nypris:59.00
  • Gl. pris:59.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CreatBot
  • Brand:
  • Produktnavn:CreatBot DX Plus
  • Produktid:1928
  • Beskrivelse:Hvis du har behov for en at printe store modeller til enten hobby eller erhvervsbrug, så en Creatbox DX Plus højst sandsynlig en 3D-printer for dig! En Creabot DX Plus kombinerer både et stort byggeareal med muligheden for at bruge helt op til tre farver
  • Nypris:17999.00
  • Gl. pris:19999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CreatBot
  • Brand:
  • Produktnavn:CreatBot DX
  • Produktid:1924
  • Beskrivelse:Size matters!</strong> This solid constructed 3D Printer hasdual print heads</strong>, semienclosed chamber</strong>with see through walls, aheated glass print bed</strong>anda Bowden style extruder</strong>. The extruder has the stepper motors p
  • Nypris:14999.00
  • Gl. pris:15999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Creator Pro > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - 0.6 mm Nozzle for MK10 Allmetal Hotend Kit
  • Produktid:1892
  • Beskrivelse:<div id="articleText This is Micro SwissMK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made fro
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Plus 3D Printer
  • Produktid:1965
  • Beskrivelse:Wanhao Duplicator i3 Plus overview: <ul> <li>Touch display</li> <li>MK10 single extruder</li> <li>Large build volume of 200 x 200 x 180 mm</li> <li>Heated bed</li> <li>Integrated electronics</li> </ul> With the enormous success of the
  • Nypris:2999.00
  • Gl. pris:3899.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Intamsys
  • Brand:
  • Produktnavn:Intamsys Funmat Pro 410
  • Produktid:12502
  • Beskrivelse:<h2>FUNMAT PRO 410 - Precise Additive Manufacturing of high temperature functional filaments & support material with this industrial 3D printer</h2> The FUNMAT PRO 410 is an industrial 3D printer for precise additive manufacturing at high temperatures.
  • Nypris:0.00
  • Gl. pris:0.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Intamsys
  • Brand:
  • Produktnavn:Intamsys Funmat HT Enhanced
  • Produktid:12497
  • Beskrivelse:<h2>INTAMSYS FUNMAT HT Enhanced - Professional high temperature 3D printer for Ultem, PEKK, PPSU, PC, PEEK & more</h2> Buy the Intamsys FUNMAT HT Enhanced professional high-temperature 3D printer for the best possible and cost-effective entry into addi
  • Nypris:56999.00
  • Gl. pris:56999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Reservedele
  • Brand:
  • Produktnavn:Extruder cleaner wire for 1.75mm printers
  • Produktid:2093
  • Beskrivelse:Piano wire made to use for clean the extruder on Wanhao and other printers using 1.75mm filament
  • Nypris:39.00
  • Gl. pris:39.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:BondTech Extruderbracket for Wanhao i3
  • Produktid:2069
  • Beskrivelse:This custom bracket for mounting the Bondtech Mini onto the Wanhao I3 printer without any modification to the original mount, makes the installation really simple and straight forward. In 2 mm steel lasercut & bended + powdercoated in black finish.
  • Nypris:149.00
  • Gl. pris:149.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Z axis Endstop switch
  • Produktid:2131
  • Beskrivelse:<span id="result_box" class="" lang="daZ-aksen Endestop switch<span class=", der passer til duplikator i3. Quick connector <span class="kabel medfølger.
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PETG - 1,75mm - 800g - Grey
  • Produktid:2151
  • Beskrivelse:We’d like to introduce the new material available in Zortrax offer - the Z-PETG. Material highly resistant to salts, acids and alkalis which makes it ideal for creating mechanical parts exposed to chemicals. Z-PETG is physically durable, great for
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ABS - 1,75mm - 800g - Yellow
  • Produktid:1422
  • Beskrivelse:<span style="font-size: large;Z-ABS Filament Z-ABS is a standard thermoplastic filament engineered for Zortrax M200. Z-ABS is our most efficient and comprehensive material. It is perfect for parts requiring testing, functional prototypes and concept mode
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PCABS - 1,75mm - 800g - Ivory
  • Produktid:2213
  • Beskrivelse:A blend of ABS and polycarbonate (PC) characterized by durability and resistance which makes it ideal for producing casings. Thanks to its resistance to high and low temperatures Z-PCABS is commonly used for producing functional prototypes. Application
  • Nypris:620.00
  • Gl. pris:620.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Perforated Plate V2 for Zortrax M200
  • Produktid:2479
  • Beskrivelse:Perforated plate. This new version is thicker and more stable in order to achieve higher dimensions accuracy in printed models. Heatbed not included.
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CraftBot
  • Brand:
  • Produktnavn:CraftBot XL 3D Printer
  • Produktid:2370
  • Beskrivelse:<div id="articleText CraftBots XL 3D-printer er perfekt til professionelt brug særligt for både arkitekter og ikke mindst ingeniører, der har brug for at arbejde med store modeller med en høj detaljegrad. I modsætning til mange øvrige 3D-printere på
  • Nypris:16495.00
  • Gl. pris:16495.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S
  • Brand:
  • Produktnavn:Wanhao 4X/4S Glas Plade
  • Produktid:2219
  • Beskrivelse:Glas plade, der passer til buildpladen på duplikatorer Wanhao 4X/4S. clips inkluderet
  • Nypris:149.00
  • Gl. pris:149.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S > Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Spoolholder D4/D5/i3
  • Produktid:2221
  • Beskrivelse:Yderdiameter: 30mm
  • Nypris:49.00
  • Gl. pris:49.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Performance HTPLA V2 - Aromatic Coffee 1,75mm 500g
  • Produktid:2250
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div>We drink plenty ofcaffeine as we push as hard as we can to bring you new Proto-pasta materials. After all, its a Northwest tradition andcaffeine fuels innovation, right? We took t
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Forest Green - 1 kg
  • Produktid:2940
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Temperature PC-ABS 1.75mm 500g Black
  • Produktid:2252
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <h1>High performance material for high performance hardware.</h1> <h1>Heated bed and all-metalhotend recommended!</h1> <div><strong id="yui_3_17_2_8_1419892303855_3005Proto-pasta Poly
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Temperature PC-ABS 2,85mm 500g Black
  • Produktid:2257
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <h1>High performance material for high performance hardware.</h1> <h1>Heated bed and all-metalhotend recommended!</h1> <div><strong id="yui_3_17_2_8_1419892303855_3005Proto-pasta Poly
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Temperature PC-ABS 1.75mm 500g Natural
  • Produktid:2256
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div class="sqs-block html-block sqs-block-html" data-block-type="2 <h1>High performance material for high performance hardware.</h1> <h1>Heated bed and all-metalhotend recommended!</
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - 1.75mm - 800g - Clear
  • Produktid:2511
  • Beskrivelse:If you ever wanted to make things that imitate glass, now it’s the right time. With Z-GLASS, you’re receiving the ability to make an exact replica of your project, even when it comes to translucent structures. Its light-transmitting surface makes it
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Zortrax Hotend V2
  • Produktid:2481
  • Beskrivelse:Heating block for precise filament extruding. Provided with nozzle. Its recommended to use with all materials from Z-Filament Series and new materials which will be launched soon. Replace Hotend V1 with this new version and achieve better printing results
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > M300 > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Zortrax Nozzle for M-Series M200 & M300
  • Produktid:2483
  • Beskrivelse:Spare nozzle for your Zortrax printer. Fits booth M200 and M300 printers.
  • Nypris:179.00
  • Gl. pris:179.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Ivory Beige - 1 kg
  • Produktid:2942
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Brick
  • Produktid:5686
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CraftBot
  • Brand:
  • Produktnavn:CraftBot PLUS - Gray
  • Produktid:10564
  • Beskrivelse:<div class="row <div class="col-md-6 <div> <h3>Lad din kreativitet tage form!</strong></h3> </div> <div>CraftBot PLUS</strong> er en eminent 3D-printer der både bruges af professionelle arkitekter eller ingeniører samt af hobbyentusiasten. Takket vær
  • Nypris:10995.00
  • Gl. pris:10995.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CraftBot
  • Brand:
  • Produktnavn:CraftBot PLUS - Blue
  • Produktid:10560
  • Beskrivelse:<div class="row <div class="col-md-6<form action="https://craftbot.com/cart" method="post <div> <h3>Lad din kreativitet tage form!</strong></h3> </div> <div>CraftBot PLUS</strong> er en eminent 3D-printer der både bruges af professionelle arkitekter
  • Nypris:10995.00
  • Gl. pris:10995.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Carbon - 1.75mm - Carbon - 0,5 kg
  • Produktid:2930
  • Beskrivelse:
  • Nypris:260.00
  • Gl. pris:260.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Deep Black - 1 kg
  • Produktid:2938
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Dragon Red - 1 kg
  • Produktid:2939
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Zortrax UV Resin - Pro - 500ml - Black
  • Produktid:8176
  • Beskrivelse:Zortrax Photopolymer Resin PRO offers the same sharp edges, high detail, and short curing times as Zortrax Resin BASIC, but has improved resistance to bending and impacts. It’s available in black. Zortrax Photopolymer Resin PRO has not been classified a
  • Nypris:679.00
  • Gl. pris:679.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Zortrax UV Resin - Flexible - 500ml - Transparent Yellow
  • Produktid:8174
  • Beskrivelse:Zortrax Resin FLEXIBLE is an elastic, epoxy-based resin which is highly impact resistant. Offers smooth surfaces, high level of detail, and sharp edges. Its shore hardness stands at 60 D and its elongation and break amounts to 19%. Low shrinkage and short
  • Nypris:1059.00
  • Gl. pris:1059.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Zortrax UV Resin - Dental - 500ml - Beige
  • Produktid:8173
  • Beskrivelse:Zortrax Resin DENTAL is a precise dental resin with a gypsum-like texture. It offersvery low shrinkage andhigh level of detail sufficient for accurate modeling of teeth and gums. The resin is available in beige color imitating the naturalcomplexion of
  • Nypris:1359.00
  • Gl. pris:1359.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Pink Panther - 1 kg
  • Produktid:2947
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Natural - 1 kg
  • Produktid:2946
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Pacific Blue - 1 kg
  • Produktid:2953
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Silver Star - 1 kg
  • Produktid:2952
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Lime Green - 1 kg
  • Produktid:2951
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Rust Copper - 1 kg
  • Produktid:2950
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Polar White - 1 kg
  • Produktid:2948
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Fluorescent Yellow - 1 kg
  • Produktid:2955
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Fluorescent Green - 1 kg
  • Produktid:2956
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Fluorescent Orange - 1 kg
  • Produktid:2957
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Transperent Blue - 1 kg
  • Produktid:2969
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Glassy - 1 kg
  • Produktid:2968
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Bottle Green - 1 kg
  • Produktid:2967
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Rubber - 1.75mm - Transparent - 0,5 kg
  • Produktid:2966
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Spectrum TPE er et meget fleksibelt materiale med karakteristika gummi. Spectrum TPE kan bruges i dagligdags reparationer (håndtag, bordskånere
  • Nypris:220.00
  • Gl. pris:220.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Rubber - 1.75mm - Polar White - 0,5 kg
  • Produktid:2965
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Spectrum TPE er et meget fleksibelt materiale med karakteristika gummi. Spectrum TPE kan bruges i dagligdags reparationer (håndtag, bordskånere
  • Nypris:220.00
  • Gl. pris:220.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 2.85mm - Deep Black - 1 kg
  • Produktid:2975
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Deep Black - 1 kg
  • Produktid:2973
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Transparent Orange - 1 kg
  • Produktid:2972
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 2.85mm - Dragon Red - 1 kg
  • Produktid:8583
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto,<em>“even the best 3D printer means nothing without a good filament”</em>. Ved brug af Spectrum PLA Filament vil dit 3D print
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Transparent Red - 1 kg
  • Produktid:2970
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Transparent Yellow - 1 kg
  • Produktid:2971
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Ukategoriseret
  • Brand:
  • Produktnavn:Værdi bevis
  • Produktid:3163
  • Beskrivelse:This product has been automatically created by the plugin YITH Gift Cards.You must not edit it, or the plugin could not work properly
  • Nypris:0.00
  • Gl. pris:0.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Ukategoriseret
  • Brand:
  • Produktnavn:Værdi bevis
  • Produktid:3162
  • Beskrivelse:This product has been automatically created by the plugin YITH Gift Cards.You must not edit it, or the plugin could not work properly
  • Nypris:0.00
  • Gl. pris:0.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 2.85mm - Silver Star - 1 kg
  • Produktid:2985
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 2.85mm - Polar White - 1 kg
  • Produktid:2982
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S
  • Brand:
  • Produktnavn:Wanhao MK8-MK10 Drive Gear
  • Produktid:3318
  • Beskrivelse:Drive Gear that fits to MK8/9, MK10 extruder.
  • Nypris:59.00
  • Gl. pris:59.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Printafix
  • Brand:
  • Produktnavn:APRINTAPRO PrintaFix Basic 500ml
  • Produktid:3298
  • Beskrivelse:<div class="page" title="Page 1 <div class="layoutArea <div class="column APRINTAPRO PrintaFix Basic - En ny simple måde at få fastholde printet til beden. </div> Ønsker du en simple løsning på at printet ikke vil sidde ordenligt til print fladen
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CreatBot
  • Brand:
  • Produktnavn:CreatBot D600
  • Produktid:3592
  • Beskrivelse:<div class="row page-header border-bottom-none <h2 class="text-center text-uppercaseTEMPERATURE UP TO 400°C</strong></h2> </div> <div class="row <p class="text-center color-666 col-sm-8 col-sm-offset-2We are the first one to publish 400°C ultra-hight
  • Nypris:68999.00
  • Gl. pris:68999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Zortrax
  • Brand:
  • Produktnavn:Zortrax Inventure - Professional 3D printer + industrial quality
  • Produktid:3587
  • Beskrivelse:Alt hvad du behøver i en kasse! Zortrax Inventure er udstyret med Alt hvad du behøver for at starte dit arbejde: Z-SUITE software Z-ULTRAT Plus-box Z-SUPPORT box DSS station Starter Kit med nyttige værktøjer Detaljeret print på grund af DSS Zortr
  • Nypris:21999.00
  • Gl. pris:25999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Flashforge
  • Brand:
  • Produktnavn:Flashforge Inventor 3D Printer
  • Produktid:3518
  • Beskrivelse:Flashforge Inventor er en filamentbaseret 3D-printer med et helt lukket design, der er sikkert at bruge indendørs og omkring børn. Den har en fantastisk 50 mikron printopløsning. Fem blæsereer udstyret med en temperatur aktiveret sensor, der regulerer by
  • Nypris:9999.00
  • Gl. pris:9999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PETG - M300 - 1.75 mm - 2 kg - Grey
  • Produktid:3322
  • Beskrivelse:Material highly resistant to salts, acids and alkalis, excellent for creating mechanical parts exposed to chemicals. Z-PETG is physically durable, great for prototyping diverse and demanding elements. Applications <ul> <li>Parts required to be resi
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PETG - M300 - 1.75 mm - 2 kg - Black
  • Produktid:3324
  • Beskrivelse:Material highly resistant to salts, acids and alkalis, excellent for creating mechanical parts exposed to chemicals. Z-PETG is physically durable, great for prototyping diverse and demanding elements. Applications <ul> <li>Parts required to be resi
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Flashforge
  • Brand:
  • Produktnavn:Flashforge Hunter 3D Printer
  • Produktid:3511
  • Beskrivelse:FlashForge Hunter er en DLP (Digital Light Processing) 3D-printer, som giver brugeren mulighed for at printeen 3D-model i høj kvalitet. Kompatibelmed tredjepartsresin:</strong> FlashForge Hunter DLP 3D Printer er kompatibel med resin fra 3. part, s
  • Nypris:30999.00
  • Gl. pris:30999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - Plated Wear Resistant Nozzle for Zortrax M200 / M300 - 0.40mm
  • Produktid:3280
  • Beskrivelse:This nozzle will fitZortrax M200 / M300, Afinia and UP! style printers, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest c
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CreatBot
  • Brand:
  • Produktnavn:CreatBot DE Plus
  • Produktid:3608
  • Beskrivelse:Størrelse betyder noget!</strong> Denne solidkonstruerede 3D-printer har dobbelt printhoveder, semi-lukket kammer med gennemsigtige vægge, en opvarmet glas print bed og en Bowden-ekstruder. Ekstruderen har steppermotorerne placeret bag på maskinen, hvi
  • Nypris:23999.00
  • Gl. pris:23999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Zortrax
  • Brand:
  • Produktnavn:Zortrax M300 3D Printer
  • Produktid:3895
  • Beskrivelse:Forstørret printvolumen, evne til at printe store modeller. Nøglefunktioner:</strong> • Stort printvolumen • Timer af arbejde uden forstyrrelser • Stor nøjagtighed • Forskellige materiale muligheder. 3D printer udstyret med forstørret ar
  • Nypris:24999.00
  • Gl. pris:28799.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3
  • Brand:
  • Produktnavn:Wanhao Heating Cartridge Duplicator i3 V2
  • Produktid:4145
  • Beskrivelse:Her er den nye udgave af heating tube til Duplicator i3 V2. Diameter: 6.3 mm. længde: 26,59 mm. 12 volt 40 Watt
  • Nypris:79.00
  • Gl. pris:79.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 > Tilbehør
  • Brand:
  • Produktnavn:Wanhao i3 Steel Base plate
  • Produktid:4155
  • Beskrivelse:This base plate is mounted on the Y axis and holds the bearings. The Heated build plate is mounted on top of this one. Fits do Duplicator i3 V 2.1 and Plus
  • Nypris:129.00
  • Gl. pris:129.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting UV Curable Resin Castable 2 x 500 ml Bottles
  • Produktid:4174
  • Beskrivelse:Castable Resin XYZprinting Nobel 1.0A castable light-cured resin material is produced with special recipe. The printed product features delicate and smooth texture, and castable on the fly. It is ideal for making prototype for jewelry accessory, arts and
  • Nypris:2099.00
  • Gl. pris:2099.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting Nobel Resin 2 x 500 ml Bottles - Blue
  • Produktid:4178
  • Beskrivelse:Resin for the XYZPrinting Nobel 1.0 SLA 3D-Printer. 2 bottles of each 500 ml total 1000 ml
  • Nypris:1199.00
  • Gl. pris:1199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting UV Curable Resin Flexible 2 x 500ml
  • Produktid:4185
  • Beskrivelse:Flexible Resin Presenting the flexible resin exclusively designed for the XYZprinting Nobel series printer. The material have been developed and extensively tested by the professional R&D team. In addition to providing printing quality with superior deta
  • Nypris:1699.00
  • Gl. pris:1699.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting Nobel Resin 2 x 500 ml Bottles - Clear
  • Produktid:4192
  • Beskrivelse:Resin for the XYZPrinting Nobel 1.0 SLA 3D-Printer. 2 bottles of each 500 ml total 1000 ml
  • Nypris:1199.00
  • Gl. pris:1199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting Nobel Resin 2 x 500 ml Bottles - Grey
  • Produktid:4193
  • Beskrivelse:Resin for the XYZPrinting Nobel 1.0 SLA 3D-Printer. 2 bottles of each 500 ml total 1000 ml
  • Nypris:600.00
  • Gl. pris:1199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:XYZprinting Nobel Resin 2 x 500 ml Bottles - Red
  • Produktid:4194
  • Beskrivelse:Resin for the XYZPrinting Nobel 1.0 SLA 3D-Printer. 2 bottles of each 500 ml total 1000 ml
  • Nypris:1199.00
  • Gl. pris:1199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Clear
  • Produktid:4201
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Black
  • Produktid:4196
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Green
  • Produktid:4204
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Grey
  • Produktid:4209
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Red
  • Produktid:4214
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - Orange
  • Produktid:4211
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 1000 ml - White
  • Produktid:4217
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:579.00
  • Gl. pris:579.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta HTPLA V2 Glitter Flake Stardust 500g
  • Produktid:4453
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <div class="sqs-block html-block sqs-block-html" data-block-type="2 <h1>Give your prints a festive POP with sparkly Glitter Flake!</h1> <div>Sometimes you want a professional matte fin
  • Nypris:349.00
  • Gl. pris:349.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CREALITY 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10s 500 X axis belt
  • Produktid:4522
  • Beskrivelse:1pcs:<span style="font-size: 14.4px;Belt for x axis belt on CR-10s 500 and CR-10S <footer> <div class="top-footer bg-primary <div class="container</div> </div> </footer>
  • Nypris:79.00
  • Gl. pris:79.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10s Build plate with Heated bed 310*310
  • Produktid:4524
  • Beskrivelse:
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10S series Thermistor/sensor
  • Produktid:4523
  • Beskrivelse:Thermistor/sensor for the hot-end. Fits for CR-10, CR-10s
  • Nypris:39.00
  • Gl. pris:39.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10 Timing pulley
  • Produktid:4526
  • Beskrivelse:Creality 3D CR-10 Timing pulley / Timing belt gear. One pulley in the package.
  • Nypris:59.00
  • Gl. pris:59.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Glas plade til CR-10 30x30cm
  • Produktid:4525
  • Beskrivelse:Creality 3D CR-10, 10S Glas plade 310*310
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200
  • Brand:
  • Produktnavn:Zortrax Extruder Motor + Extruder Bearing
  • Produktid:4530
  • Beskrivelse:Motor for filament feeding and small bearing for putting pressure on the filament. Mounted in extruder.
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:624 Bearing
  • Produktid:4527
  • Beskrivelse:1stk
  • Nypris:39.00
  • Gl. pris:39.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Red
  • Produktid:4570
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Green
  • Produktid:4577
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Blue
  • Produktid:4578
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Natural White
  • Produktid:4580
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Grey
  • Produktid:4579
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - M300 - 1.75 mm - 2 kg - Black
  • Produktid:4581
  • Beskrivelse:Material with outstanding resistance to warping during 3D printing process. Thanks to this feature Z-HIPS is excellent for making large elements such as: housing prototypes, bigger parts or architecture mockups. It has unique matte texture, which absorbs
  • Nypris:800.00
  • Gl. pris:800.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10 S4
  • Produktid:4615
  • Beskrivelse:<div id="page" class="page-designer-skin <div id="content" class="official-content detail-page-content <div id="bd <div id="bd-inner <div id="extend" class="detail-page layout row-c2-s7 <div id="product-detail" class="col-main detail-wrap detail-main
  • Nypris:5999.00
  • Gl. pris:5999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:CR10 / MK8 Red Metal Extruder Kit
  • Produktid:4722
  • Beskrivelse:CR10 / MK8 Red Metal Extruder Kit. Comes with Spring, Pulley, Extruder Gear and Tube Connector.
  • Nypris:189.00
  • Gl. pris:189.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D Brass Nozzle 0,8 mm
  • Produktid:4721
  • Beskrivelse:
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D Brass Nozzle 0,2 mm
  • Produktid:4718
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in 0,2mm Brass nozzle for Creality Cr-10 series. </div> </div> </div> </s
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:SanDisk Ultra MicroSDHC UHS-I/Class 10 - 16GB
  • Produktid:4671
  • Beskrivelse:
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:Raspberry Pi Camera V2 (8MP)
  • Produktid:4664
  • Beskrivelse:
  • Nypris:289.00
  • Gl. pris:289.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10 S5
  • Produktid:4623
  • Beskrivelse:<div id="page" class="page-designer-skin <div id="content" class="official-content detail-page-content <div id="bd <div id="bd-inner <div id="extend" class="detail-page layout row-c2-s7 <div id="product-detail" class="col-main detail-wrap detail-main
  • Nypris:9899.00
  • Gl. pris:9899.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CreatBot > CreatBot DX/DX plus > Reservedele > Tilbehør
  • Brand:
  • Produktnavn:CreatBot glas plade til DX
  • Produktid:4787
  • Beskrivelse:Passer på CreatBot DX & DX plus.
  • Nypris:349.00
  • Gl. pris:349.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Reservedele
  • Brand:
  • Produktnavn:Belt Tension Spring
  • Produktid:4730
  • Beskrivelse:
  • Nypris:34.00
  • Gl. pris:34.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 Plus
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Plus Extruder fan
  • Produktid:4725
  • Beskrivelse:
  • Nypris:79.00
  • Gl. pris:79.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10S Main board V2.1
  • Produktid:4723
  • Beskrivelse:Creality 3D CR-10S Main board V2.1
  • Nypris:539.00
  • Gl. pris:539.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CreatBot > CreatBot DX/DX plus > Reservedele > Tilbehør
  • Brand:
  • Produktnavn:CreatBot silikone heater pad til DX
  • Produktid:4794
  • Beskrivelse:Passer under glaspladen på CreatBot DX & DX plus.
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:Raspberry pi Camara 30cm cable
  • Produktid:4856
  • Beskrivelse:
  • Nypris:35.00
  • Gl. pris:35.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:Raspberry pi Camara 50cm cable
  • Produktid:4854
  • Beskrivelse:
  • Nypris:46.00
  • Gl. pris:46.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Tilbehør
  • Brand:
  • Produktnavn:Limonene - Opløsningsmild til HIPS 1 liter
  • Produktid:4841
  • Beskrivelse:LIMONENE is the perfect solvent for anyone wanting to print support heavy multi extrusion 3D models who does not want to spend hours having to manually remove , non dissolvable, support structures. The limonene will initially soften the hips and over time
  • Nypris:329.00
  • Gl. pris:329.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 Plus
  • Brand:
  • Produktnavn:Heating Cartridge Duplicator i3 Plus
  • Produktid:4867
  • Beskrivelse:
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 Plus
  • Brand:
  • Produktnavn:Wanhao Thermistor Di3 Plus
  • Produktid:4865
  • Beskrivelse:
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D
  • Brand:
  • Produktnavn:Raise3D V2H Nozzle 0,4mm
  • Produktid:4864
  • Beskrivelse:This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit.
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Printafix
  • Brand:
  • Produktnavn:APRINTAPRO PrintaClean 500ml
  • Produktid:4860
  • Beskrivelse:
  • Nypris:129.00
  • Gl. pris:129.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:Raspberry PI 3 Model B
  • Produktid:4858
  • Beskrivelse:
  • Nypris:319.00
  • Gl. pris:319.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10s Bowden Tube 47cm
  • Produktid:5045
  • Beskrivelse:
  • Nypris:35.00
  • Gl. pris:35.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > Cr-10s Pro
  • Brand:
  • Produktnavn:Creality 3D CR-10s Tube connector push-fitting (Print head)
  • Produktid:5041
  • Beskrivelse:Connector that holds the guide tube in place on the print head. <em>This is used on both print head and extruder for the cr-10s pro</em>
  • Nypris:49.00
  • Gl. pris:49.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Bondtech
  • Brand:
  • Produktnavn:Bondtech BMG Extruder 1.75mm Lefthand (Bowden)
  • Produktid:5082
  • Beskrivelse:<h1 class="articleNameBMG Extruder</h1> <div class="articleImageWrapper imageswitcher</div> <div class="articleInfo <div id="articleAbstractBondtech now brings you the best and lightest performing extruder on the market that combines low weight with hi
  • Nypris:899.00
  • Gl. pris:899.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raspberry Pi
  • Brand:
  • Produktnavn:Officiel Raspberry Pi 3 Strømforsyning 2,5 A
  • Produktid:4934
  • Beskrivelse:Officiel Raspberry Pi 3 Strømforsyning 5 Volt op til 2,5 ampere virker til alle Raspberry pi boards
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10 Mini
  • Produktid:5014
  • Beskrivelse:Creality3D Mini er en mindre version af den populære CR-10 serie. Printeren har en solid metalramme og en opvarmet bed. Printeren er designet til at blive brugt sammen med PLA og PETG ud af kassen. For at printe mere eksotiske materialer som TPU, TP
  • Nypris:3499.00
  • Gl. pris:3499.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect FLEX - 1.75mm - 500 g - Black
  • Produktid:5032
  • Beskrivelse:PrimaSELECTFlexis a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need astrong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid b
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Navy Blue - 1 kg
  • Produktid:5160
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Dark Grey - 1 kg
  • Produktid:5159
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Arctic White - 1 kg
  • Produktid:5158
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Bondtech
  • Brand:
  • Produktnavn:Bondtech BMG Extruder 1.75mm Righthand
  • Produktid:5085
  • Beskrivelse:<h1 class="articleNameBMG Extruder</h1> <div class="articleImageWrapper imageswitcher</div> <div class="articleInfo <div id="articleAbstractBondtech now brings you the best and lightest performing extruder on the market that combines low weight with hi
  • Nypris:879.00
  • Gl. pris:879.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss MK8 Nozzle 0.4mm upgrade
  • Produktid:5047
  • Beskrivelse:This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D CR-10S 400 Glass plate 410*410
  • Produktid:5068
  • Beskrivelse:
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Bondtech
  • Brand:
  • Produktnavn:Bondtech BMG Extruder 1.75mm Righthand (Bowden)
  • Produktid:5065
  • Beskrivelse:<h1 class="articleNameBMG Extruder</h1> <div class="articleImageWrapper imageswitcher</div> <div class="articleInfo <div id="articleAbstractBondtech now brings you the best and lightest performing extruder on the market that combines low weight with hi
  • Nypris:899.00
  • Gl. pris:899.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Bondtech
  • Brand:
  • Produktnavn:Bondtech BMG Extruder 1.75mm Lefthand
  • Produktid:5084
  • Beskrivelse:<h1 class="articleNameBMG Extruder</h1> <div class="articleImageWrapper imageswitcher</div> <div class="articleInfo <div id="articleAbstractBondtech now brings you the best and lightest performing extruder on the market that combines low weight with hi
  • Nypris:879.00
  • Gl. pris:879.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Bloody Red - 1 kg
  • Produktid:5161
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D
  • Brand:
  • Produktnavn:Raise3D Hotend assembly
  • Produktid:5173
  • Beskrivelse:Raise 3D Hotend assembly that fits to N1, N2 and N2 plus
  • Nypris:799.00
  • Gl. pris:799.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Mini
  • Produktid:5381
  • Beskrivelse:The Duplicator i3 Mini is the latest derivative in the very popular i3 range of 3D Printers. The Mini has a smaller build size than the standard i3, but still large enough for most projects. The printer comes almost fully assembled and will be ready to
  • Nypris:1699.00
  • Gl. pris:1699.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Zortrax
  • Brand:
  • Produktnavn:Zortrax M200 Plus 3D Printer
  • Produktid:5357
  • Beskrivelse:<h3>Desktop 3D printer ready for rapid manufacturing</strong></h3> Expand your 3D printing capabilities with Zortrax M200 Plus 3D printer. Easily manage multiple devices overWi-Fiusing Z-SUITE slicing software. Monitor the progress with the built-in c
  • Nypris:17799.00
  • Gl. pris:18999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 500ml - Black
  • Produktid:5355
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 500ml - Blue
  • Produktid:5354
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 500ml - Clear
  • Produktid:5353
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 500ml - Grey
  • Produktid:5351
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 500ml - White
  • Produktid:5350
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 1000ml - White
  • Produktid:5348
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 1000ml - Grey
  • Produktid:5346
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 1000ml - Clear
  • Produktid:5339
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 1000ml - Blue
  • Produktid:5337
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Monocure 3D RAPID resin - 1000ml - Black
  • Produktid:5333
  • Beskrivelse:Monocure 3D RAPID photo-reactive clear resin has been designed to use in low powered LED type DLP 3D Printers for UV wavelengths up to 420nm. The transparent appearance allows you to see internal features that would be useful for research, prototyping and
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Anycubic > Photon DLP
  • Brand:
  • Produktnavn:Anycubic Photon Resin Spare Tank
  • Produktid:5319
  • Beskrivelse:Extra spare resin tank for the Anycubic Photon DLP printers. Some also call this VAT Tank
  • Nypris:429.00
  • Gl. pris:429.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Anycubic
  • Brand:
  • Produktnavn:Anycubic Photon DLP
  • Produktid:5295
  • Beskrivelse:3D Print with great details with Anycubic Photon DLP printer.</strong> Anycubic Photon SLA 3D Printer equipped with an easy to use 2.8 Colour touch screen and offers stable offline printing. By using the extraordinary in-built slicer gets the slicing j
  • Nypris:4299.00
  • Gl. pris:5299.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect FLEX - 1.75mm - 500 g - White
  • Produktid:5279
  • Beskrivelse:PrimaSELECTFlexis a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need astrong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid b
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect FLEX - 1.75mm - 500 g - Blue
  • Produktid:5278
  • Beskrivelse:PrimaSELECTFlexis a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need astrong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid b
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:PrimaSelect FLEX - 1.75mm - 500 g - Red
  • Produktid:5276
  • Beskrivelse:PrimaSELECTFlexis a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need astrong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid b
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PETG - 1.75mm - Arctic White - 1 kg
  • Produktid:5237
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PETG Filament vil dit 3D print: <ul> <li>Ridsefasthed</li> <li>Bæredygtighed print</li> <li>Høj kvalitet</li>
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Pearl Bronze - 1 kg
  • Produktid:5235
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Gypsum White
  • Produktid:5683
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > Zortrax
  • Brand:
  • Produktnavn:Zortrax HEPA Spare Filter
  • Produktid:5681
  • Beskrivelse:Zortrax HEPA Spare Filter</strong>
  • Nypris:319.00
  • Gl. pris:319.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > M200 Plus > Zortrax
  • Brand:
  • Produktnavn:Zortrax HEPA Cover for M200 Series
  • Produktid:5679
  • Beskrivelse:Zortrax HEPA Cover</strong> is a filtering device compatible with Zortrax M200 and Zortrax M200 Plus 3D printers. It keeps the temperature stable inside the printing chamber to reduce warping of ABS-based materials. Built-in carbon filter gets rid of unpl
  • Nypris:1999.00
  • Gl. pris:1999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Smart ABS - 1.75mm - Deep Black - 1 kg
  • Produktid:5667
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum ABS Filament vil dit 3D print: Smart ABS</strong> sammenlignet med standard ABS er kendetegnet ved: - reduceret krym
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Military Khaki - 1 kg
  • Produktid:5228
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Pastel Turquoice - 1 kg
  • Produktid:5225
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Pearl Gold - 1 kg
  • Produktid:5232
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <ul> <li>Mindre warping</li> <li>Holdbarhed og stabilitet af printet</li> <li>Høj
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CreatBot
  • Brand:
  • Produktnavn:CreatBot F160
  • Produktid:5390
  • Beskrivelse:<div> <div> <h2>Support400°CHotend</strong></h2> We are the first one to publish 400°C high temperature nozzle to 3d printer market. This kind of nozzle allow to print with a variety of filaments. The nozzle height can also be micro adjusted. </di
  • Nypris:9999.00
  • Gl. pris:9999.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Creator Pro > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss Plated Wear Resistant Nozzle MK10 Nozzle 0.6mm
  • Produktid:5432
  • Beskrivelse:For PTFE lined hotends only</strong> This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coeffic
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-SEMIFLEX - 1,75mm - 800g - Black
  • Produktid:5532
  • Beskrivelse:
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator D7 Plus
  • Produktid:5522
  • Beskrivelse:Wanhao D7 Plus er den seneste version af den populære D7 DLP printer Wanhao Duplicator 7 DLP er en resindesktop 3D-printer lavet af Wanhao. Duplicator 7 har et buildareal på 120x68x200mm og en lag opløsningsevne på 35 mikron. DLP står for Digital Li
  • Nypris:5499.00
  • Gl. pris:5499.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 6 Plus Printer
  • Produktid:5505
  • Beskrivelse:NEW!</strong> <ul> <li>Brand new MK11 extruder as standard</strong></li> <li>Latest D6 Plus version with Auto Bed leveling.</strong></li> <li>Magnetic print surface.</strong></li> <li>With Side covers, door and top cover</strong></li> <li>
  • Nypris:7995.00
  • Gl. pris:7995.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10 mini > Cr-10s
  • Brand:
  • Produktnavn:Creality 3D Cable Extension kit for CR-10 series
  • Produktid:5545
  • Beskrivelse:
  • Nypris:289.00
  • Gl. pris:289.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Raise3D
  • Brand:
  • Produktnavn:Raise3D Pro2
  • Produktid:5552
  • Beskrivelse:The new Pro2 series from Raise3D takes 3D-Printing to a new dimension! Print big and fast with superior quality. <ul> <li>Dual Extruder: Electronic driven lifting of the extruder not in use = less problems and improved performance</li> <li>Massi
  • Nypris:33499.00
  • Gl. pris:33499.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss 300°C Flexible Friendly Hotend Kit with Heater Block
  • Produktid:5607
  • Beskrivelse:Micro Swiss Flexible Friendly Hotend Kit for CR-10</strong> This is a drop in Flexible Friendly Hotend kit for CR-10 printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss All Metal Hotend Kit with Heater Block
  • Produktid:5611
  • Beskrivelse:Micro Swiss All Metal Hotend Kit for CR-10:</strong> This is a drop in All Metal Conversion kit for CR-10 printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tub
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.2 mm
  • Produktid:5615
  • Beskrivelse:This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Duplicator i3 > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.6 mm
  • Produktid:5616
  • Beskrivelse:This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D
  • Brand:
  • Produktnavn:Creality 3D CR-10s series Heat cartridge/heating tube
  • Produktid:5618
  • Beskrivelse:Creality 3D CR-10, CR-10S 300/400/500Heat cartridge/heating tube 12 V
  • Nypris:79.00
  • Gl. pris:79.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > CraftBot
  • Brand:
  • Produktnavn:CraftBot 3 - Grey 3D Printer
  • Produktid:5636
  • Beskrivelse:DUAL EXTRUSION PRINT HEAD</strong> De to hotends giver mulighed for at printe 2 objekter ad gangen såvel som PVA-print, der gør support understøttende en nem opgave, da du kan opløse det i vand efter printet er færdig FILAMENT OVERVÅGNINGSSYSTEM</stro
  • Nypris:17795.00
  • Gl. pris:17795.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Bright Red
  • Produktid:5685
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Pure Black
  • Produktid:5684
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > Reservedele > Zortrax
  • Brand:
  • Produktnavn:Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Zortrax M200
  • Produktid:7415
  • Beskrivelse:This is Micro Swiss All Metal Hotend kit for Zortrax M200. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made f
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M200 > M300
  • Brand:
  • Produktnavn:Zortrax Nozzle for M-Series Plus M200 Plus & M300 Plus
  • Produktid:7402
  • Beskrivelse:Spare nozzle for your Zortrax printer. Fits booth M200 Plus and M300 Plus printers.
  • Nypris:159.00
  • Gl. pris:159.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D Ender 3 PRO
  • Produktid:7388
  • Beskrivelse:<h2>Creality Ender-3 Pro - Low cost FFF-3D printer for your home, office or workshop</h2> Buy the good-value Creality Ender-3 Pro FFF 3D printer and get a small production machine for your home, office or workshop. You get good 3D prints quickly and ea
  • Nypris:2999.00
  • Gl. pris:3299.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:M300 > M300 Plus > Zortrax
  • Brand:
  • Produktnavn:Zortrax HEPA Cover for M300 Series
  • Produktid:7367
  • Beskrivelse:Zortrax HEPA Cover</strong> is a filtering device compatible with Zortrax M200 and Zortrax M200 Plus 3D printers. It keeps the temperature stable inside the printing chamber to reduce warping of ABS-based materials. Built-in carbon filter gets rid of unpl
  • Nypris:2199.00
  • Gl. pris:2199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality CR-X
  • Produktid:7326
  • Beskrivelse:Advantage:</strong> 1.Two-color printing: double-injection and one-out nozzle design. Two consumables, two extruders, one nozzle. 2. Integrateddesign: The exterior design of the profiled sheet metal base is used to store most of the electronic compo
  • Nypris:5999.00
  • Gl. pris:6299.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > ProtoPasta Filament
  • Brand:
  • Produktnavn:Proto-pasta High Temperature PC-ABS 2,85mm 500g Natural
  • Produktid:2258
  • Beskrivelse:<div class="sqs-block html-block sqs-block-html" data-block-type="2 <h1>High performance material for high performance hardware.</h1> <h1>Heated bed and all-metalhotend recommended!</h1> <div><strong id="yui_3_17_2_8_1419892303855_3005Proto-pasta Poly
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Blue
  • Produktid:5687
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Cool Grey
  • Produktid:5688
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - 1,75mm - 800g - Concrete Grey
  • Produktid:5689
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:500.00
  • Gl. pris:500.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Gypsum White
  • Produktid:5690
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Bright Red
  • Produktid:5692
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Pure Black
  • Produktid:5691
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Blue
  • Produktid:5694
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Brick
  • Produktid:5693
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Concrete Grey
  • Produktid:5696
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-PLA Pro - M300 - 1,75mm - 2 kg - Cool Grey
  • Produktid:5695
  • Beskrivelse:Play with THE SCALE.</strong> With Z-PLA Pro you can modify the size of your prototypes and each time get the required dimensional accuracy and high quality visible in every detail. Get the best aesthetics in a convenient and eco-friendly manner. Reduce
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Creality 3D
  • Brand:
  • Produktnavn:Creality 3D Ender 3
  • Produktid:5710
  • Beskrivelse:Creality Ender 3</strong> Ender 3 er nyeste skud på stammen fra Creality 3D. Den minder på mange punkter om den kendte Creality3D Cr10 printer. Den er bygget med samme V-slot stænger og hjul, som sikre en præcis og lydsvag bevægelse (sammenlignet med l
  • Nypris:2699.00
  • Gl. pris:2999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality3D mk8 Extruder Plast sort
  • Produktid:5798
  • Beskrivelse:
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s > CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality CR-10s (s4+s5) autobed leveling kit
  • Produktid:5742
  • Beskrivelse:Orginal Creality CR-10s Autobed leveling kit</strong> Bemærk, da produktet er meget nyt har vi endnu ikke færdiggjort en guide og kittet leveres EU strøm adaptor. Anbefales kun til erfarne brugere. &nbsp; Passer på: https://3dstore.dk/shop/3d
  • Nypris:399.00
  • Gl. pris:399.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Anycubic > Photon DLP > Reservedele
  • Brand:
  • Produktnavn:Anycubic Photon FEP Film 140x200mm
  • Produktid:5810
  • Beskrivelse:FEP Film for Anycubic Photon
  • Nypris:189.00
  • Gl. pris:189.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality3D GX16-4 connector
  • Produktid:5799
  • Beskrivelse:Creality3D GX16-4 han+hun stik
  • Nypris:29.00
  • Gl. pris:29.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:CREALITY 3D > Reservedele
  • Brand:
  • Produktnavn:Creality3D GX16-8 connector
  • Produktid:5800
  • Beskrivelse:Creality3D GX16-8 han+hun stik
  • Nypris:29.00
  • Gl. pris:29.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Smart ABS - 1.75mm - Polar White - 1 kg
  • Produktid:5848
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum ABS Filament vil dit 3D print: Smart ABS</strong> sammenlignet med standard ABS er kendetegnet ved: - reduceret krym
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao Duplicator 7 V1.4 to V1.5 Conversion / Upgrade kit
  • Produktid:5879
  • Beskrivelse:V1.5 upgrading kit including <ul> <li>1 building plate</li> <li>2 x 8mm bar</li> <li>1x z axis beam</li> <li>1 top red cover</li> <li>1x coupler,</li> <li>1x aluminum base</li> <li>6pcs M4 x 8mm round bolt</li> <li>2pcs M3 x10mm h
  • Nypris:665.00
  • Gl. pris:665.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Reservedele > Tilbehør > Universal
  • Brand:
  • Produktnavn:Asien til EU 230v adaptor
  • Produktid:5817
  • Beskrivelse:Asien til EU 230v adaptor
  • Nypris:21.00
  • Gl. pris:21.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Smart ABS - 1.75mm - Dark Grey - 1 kg
  • Produktid:5847
  • Beskrivelse:Ifølge Spectrum Filaments motto, <em>""even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum ABS Filament vil dit 3D print: Smart ABS</strong> sammenlignet med standard ABS er kendetegnet ved: - reduceret krym
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Raise3D
  • Brand:
  • Produktnavn:Raise3D Pro2 Plus
  • Produktid:5908
  • Beskrivelse:The new Pro2 series from Raise3D takes 3D-Printing to a new dimension! Print big and fast with superior quality. <ul> <li>Dual Extruder: Electronic driven lifting of the extruder not in use = less problems and improved performance</li> <li>Massi
  • Nypris:46999.00
  • Gl. pris:46999.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament
  • Brand:
  • Produktnavn:EasyPrint PLA - 1.75mm - 1 kg - Rainbow
  • Produktid:5930
  • Beskrivelse:EasyPrint </strong>PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny sur
  • Nypris:199.00
  • Gl. pris:199.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao D7 UV light
  • Produktid:5952
  • Beskrivelse:Wanhao D7 UV light</strong>
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao D7 FEP Film 0.1mm
  • Produktid:5950
  • Beskrivelse:Wanhao D7 FEP Film 0.1mm</strong>
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 Thermistor
  • Produktid:6025
  • Beskrivelse:Thermostat som passer til Duplicator 9</strong>
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 Heating Tube 24 V
  • Produktid:6022
  • Beskrivelse:Heating Tube som passer til Duplicator 9</strong>
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao D7 Main board v 1.2
  • Produktid:5961
  • Beskrivelse:Wanhao D7 Main board v 1.2</strong>
  • Nypris:956.00
  • Gl. pris:956.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao D7 Resin tank
  • Produktid:5958
  • Beskrivelse:Wanhao D7 Resin tank</strong>
  • Nypris:429.00
  • Gl. pris:429.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 7 > Reservedele
  • Brand:
  • Produktnavn:Wanhao D7 LCD display
  • Produktid:5954
  • Beskrivelse:Wanhao D7 LCD display</strong>
  • Nypris:669.00
  • Gl. pris:669.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao MK10 All-Metal Nozzle 0,4mm
  • Produktid:6035
  • Beskrivelse:Wanhao MK10 All-Metal Nozzle 0,4mmtil Duplicator 9.</strong> <em>Passer kun på All-Metal versionen af MK10 extruder</em>
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 All Metal Hot End Assembly
  • Produktid:6033
  • Beskrivelse:All Metal Hot End til Duplicator 9.</strong> Inkludere: Heat Block, Nozzle og Heat break.</strong>
  • Nypris:349.00
  • Gl. pris:349.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 Main Board
  • Produktid:6027
  • Beskrivelse:Bundkort som passer til Duplicator 9</strong>
  • Nypris:1129.00
  • Gl. pris:1129.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 Magnetic Build Surface 320x320mm
  • Produktid:6029
  • Beskrivelse:Magnetisk bed som passer til Duplicator 9</strong>
  • Nypris:229.00
  • Gl. pris:229.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator 9 Heat Block
  • Produktid:6031
  • Beskrivelse:Heat block som passer til Duplicator 9</strong>
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Neon grøn
  • Produktid:6049
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Neon grøn
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > XYZprinting Da Vinci Jr. Filament
  • Brand:
  • Produktnavn:XYZprinting Da Vinci Junior PLA - 600g - Transparent Gul
  • Produktid:6048
  • Beskrivelse:XYZprinting Da Vinci Junior PLA - 600g - Transparent gul
  • Nypris:300.00
  • Gl. pris:300.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator D9 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao MK10 All-Metal Nozzle 0,8mm
  • Produktid:6037
  • Beskrivelse:Wanhao MK10 All-Metal Nozzle 0,8mmtil Duplicator 9.</strong> <em>Passer kun på All-Metal versionen af MK10 extruder</em>
  • Nypris:89.00
  • Gl. pris:89.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s
  • Brand:
  • Produktnavn:Creality 3D 42-60 Stepper Motor
  • Produktid:12205
  • Beskrivelse:Creality 3D Stepper Motor 42-40. The table bellow shows which size stepper motor that fits which axis on the different Creality 3D models: <table border="0" width="352" cellspacing="0" cellpadding="0<colgroup> <col /> <col span="4" /></colgroup> <tbo
  • Nypris:279.00
  • Gl. pris:279.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO
  • Produktid:11963
  • Beskrivelse:This is an All Metal Hotend Kit for CR10 PRO Printers.</strong> This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates
  • Nypris:599.00
  • Gl. pris:599.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss Plated Wear Resistant Nozzle for Creality CR-10s PRO - 0.60mm
  • Produktid:11958
  • Beskrivelse:This is Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotendonly. It has fineM6x.75mm threads. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10s Pro > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss Plated Wear Resistant Nozzle for Creality CR-10s PRO - 0.40mm
  • Produktid:11954
  • Beskrivelse:This is Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotendonly. It has fineM6x.75mm threads. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very
  • Nypris:139.00
  • Gl. pris:139.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Universal
  • Brand:
  • Produktnavn:Capricorn XS Series PTFE Bowden Tubing for 1.75mm Filament
  • Produktid:11945
  • Beskrivelse:<div>One Meter of our flagship PTFE Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer diameter for 1.75mm filaments.</div> <div>This is, hands down, the single best PTFE Bowden tubing you can buy for your hom
  • Nypris:159.00
  • Gl. pris:159.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Cr-10 mini > Reservedele
  • Brand:
  • Produktnavn:Creality 3D CR-10 Mini Main Board
  • Produktid:6072
  • Beskrivelse:<div class="row <div class="col-xs-12 <div class="singleheader <h4><span class="item-name text-primaryCreality 3D CR-10 Mini Main Board</strong></h4> </div> </div> </div>
  • Nypris:749.00
  • Gl. pris:749.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 6 > Duplicator i3 Plus mk2 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator i3 Plus mk2 / Duplicator 6 Plus Steel Plate
  • Produktid:6069
  • Beskrivelse:<h4><span class="item-name text-primaryWanhao Duplicator i3 Plus mk2 / Duplicator 6 Plus Steel Plate</strong></h4> To be placed on top of the aluminium bed.
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA Pro - 1.75mm - Deep Black - 1 kg
  • Produktid:6102
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Description</strong> Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.</strong> PLA Pro combines two desired features:
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Scanner
  • Brand:
  • Produktnavn:Matter and Form 3D Scanner v2 with Quickscan
  • Produktid:6074
  • Beskrivelse:<div class="row <div class="col-xs-12 <div class="singleheader <div class="row <div class="col-xs-12 <div class="singleheader Matter and Form V2 +Quickscan 3D Scanner MFS1V2</strong> V2 3D Scanner</strong> Designed to transform beginners to
  • Nypris:5399.00
  • Gl. pris:5399.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA Pro - 1.75mm - Polar White - 1 kg
  • Produktid:6103
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Description</strong> Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.</strong> PLA Pro combines two desired features:
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA Pro - 1.75mm - Silver Star - 1 kg
  • Produktid:6104
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Description</strong> Filament Spectrum PLA Pro was manufactured using raw materials developed for 3D printing.</strong> PLA Pro combines two desired features:
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Carrot Orange - 1 kg
  • Produktid:6105
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator 4S > Duplicator i3 > Duplicator i3 Plus > Micro Swiss
  • Brand:
  • Produktnavn:Micro Swiss CNC Machined Lever and Extruder Plate for Wanhao i3
  • Produktid:6130
  • Beskrivelse:This is a replacement lever and extruder plate for Wanhao i3 and all of itsclones. Lever and plate are CNC machined from 6061 billet aluminum, with weight reduction features. It will replace a stock plastic assembly that has tendency to warp over tim
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - Nylon - 1.75mm - Natural - 0.5 kg
  • Produktid:6352
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Polyamide PA6 (Nylon) is an extremely durable, technic
  • Nypris:360.00
  • Gl. pris:360.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D > Reservedele
  • Brand:
  • Produktnavn:Raise3D Pro2 V3H Nozzle 0.2 mm
  • Produktid:6291
  • Beskrivelse:Extra nozzle for the Raise3D Pro2 series. Hardened version This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Aurora Gold - 1 kg
  • Produktid:6354
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Light Grey - 1 kg
  • Produktid:6353
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <
  • Nypris:160.00
  • Gl. pris:160.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D > Reservedele
  • Brand:
  • Produktnavn:Raise3D Pro2 V3H Nozzle 1.0 mm
  • Produktid:6359
  • Beskrivelse:Extra nozzle for the Raise3D Pro2 series. Hardened version This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D > Reservedele
  • Brand:
  • Produktnavn:Raise3D Pro2 V3H Nozzle 0.8 mm
  • Produktid:6358
  • Beskrivelse:Extra nozzle for the Raise3D Pro2 series. Hardened version This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Raise3D > Reservedele
  • Brand:
  • Produktnavn:Raise3D Pro2 V3H Nozzle 0.4 mm
  • Produktid:6357
  • Beskrivelse:Extra nozzle for the Raise3D Pro2 series. Hardened version This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest
  • Nypris:249.00
  • Gl. pris:249.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Glow in the Dark - 1 kg
  • Produktid:6356
  • Beskrivelse:Ifølge Spectrum Filaments motto,<em>“even the best 3D printer means nothing without a good filament”</em>. <ul> <li>PLA Glow in the Dark - er et materiale med en fosforforbindelse, der gør 3D-print modellen lysende i mørket efter lys eksponering.
  • Nypris:290.00
  • Gl. pris:290.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Spectrum Filaments
  • Brand:
  • Produktnavn:Spectrum Filaments - PLA - 1.75mm - Volcano Grey - 1 kg
  • Produktid:6355
  • Beskrivelse:<div id="component_projector_longdescription_not" class="projector_longdescription cm Ifølge Spectrum Filaments motto, <em>"even the best 3D printer means nothing without a good filament"</em>. Ved brug af Spectrum PLA Filament vil dit 3D print: <
  • Nypris:180.00
  • Gl. pris:180.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Duplicator i3 > Reservedele > Wanhao
  • Brand:
  • Produktnavn:Wanhao Build surface 220x220mm
  • Produktid:6360
  • Beskrivelse:Original Wanhao replacement print surface for Wanhao Duplicator i3 / i3 Plus / D6 3M adhesive on back side so you can attach it Works on other printers too. You can easily cut it to the size of your printer with a normal scissor.
  • Nypris:119.00
  • Gl. pris:119.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Elektronik > Reservedele
  • Brand:
  • Produktnavn:Moons stepper motor - Nema17 - 42mm
  • Produktid:6372
  • Beskrivelse:<h3 class="codeMS17HD2P4200 <span class="sub-titleStepper motor, High torque, Low noise, Smooth movement, 2 phase, 1.8°, NEMA17</h3> &nbsp; <table style="height: 595px;" width="468 <tbody> <tr> <th>Parameter</th> <th>Unit</th> <th>Value</th> </tr
  • Nypris:445.00
  • Gl. pris:445.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Yellow
  • Produktid:6384
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8 - 16s</td> </tr> <tr> <td height="36Visco
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Green
  • Produktid:6388
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Orange
  • Produktid:6391
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Red
  • Produktid:6394
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Grey
  • Produktid:6397
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Clear
  • Produktid:6401
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - White
  • Produktid:6404
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin - 500 ml - Black
  • Produktid:6407
  • Beskrivelse:Wanhao UV Resin for DLP / SLA / LCD 3D-Printers <table> <tbody> <tr> <td width="431" height="36Wavelength</td> <td width="349405NM</td> </tr> <tr> <td width="431" height="36Time for solidify</td> <td>8_16s</td> </tr> <tr> <td height="36Viscosi
  • Nypris:369.00
  • Gl. pris:369.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 1000 ml - Grey
  • Produktid:6411
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-DLP resin - Low cost resin for your DLP and UV-LED 3
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 1000 ml - Clear
  • Produktid:6415
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-LED- & DLP water washable resin - Low cost resin for
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 1000 ml - White
  • Produktid:6416
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-DLP resin - Low cost resin for your DLP and UV-LED 3
  • Nypris:619.00
  • Gl. pris:619.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 500 ml - Grey
  • Produktid:6420
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-DLP resin - Low cost resin for your DLP and UV-LED 3
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 500 ml - Clear
  • Produktid:6423
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-LED- & DLP water washable resin - Low cost resin for
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Resin
  • Brand:
  • Produktnavn:Wanhao 3D-Printer UV Resin Water Washable - 500 ml - White
  • Produktid:6426
  • Beskrivelse:<div class="container main-content <section id="product" class="content-wrap <div class="row mt-xs-20 <div class="tab-content <div id="desc" class="tab-pane fade active in <h2>Wanhao 3D printer UV-DLP resin - Low cost resin for your DLP and UV-LED 3
  • Nypris:389.00
  • Gl. pris:389.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Wanhao
  • Brand:
  • Produktnavn:Wanhao Duplicator D8 DLP
  • Produktid:6447
  • Beskrivelse:<h2>Wanhao Duplicator D8 - Good-value DLP UV resin 3D printer for high accuracy and precision</h2> Buy this good-value and easy to use DLP 3D printer and get into powerful resin 3D printing. With the Wanhao Duplicator D8 you are able to make precise an
  • Nypris:10899.00
  • Gl. pris:10899.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:3D Printer > Wanhao
  • Brand:
  • Produktnavn:Wanhao Boxman-1 UV LED Curing Box
  • Produktid:6454
  • Beskrivelse:<h2>Wanhao Boxman-1 UV Curing Chamber / Box - Cure your SLA, DLP & daylight 3D prints</h2> Automatically cure your SLA, DLP, or LCD 3D prints with Wanhaos Boxman-1 UV post-curing chamber. To obtain the final material properties with resin-based 3D prin
  • Nypris:3899.00
  • Gl. pris:3899.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - 1.75mm - 800g - Blue
  • Produktid:6510
  • Beskrivelse:If you ever wanted to make things that imitate glass, now it’s the right time. With Z-GLASS, you’re receiving the ability to make an exact replica of your project, even when it comes to translucent structures. Its light-transmitting surface makes it
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - 1.75mm - 800g - Android Green
  • Produktid:6521
  • Beskrivelse:If you ever wanted to make things that imitate glass, now it’s the right time. With Z-GLASS, you’re receiving the ability to make an exact replica of your project, even when it comes to translucent structures. Its light-transmitting surface makes it
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - 1.75mm - 800g - Neon Yellow
  • Produktid:6522
  • Beskrivelse:If you ever wanted to make things that imitate glass, now it’s the right time. With Z-GLASS, you’re receiving the ability to make an exact replica of your project, even when it comes to translucent structures. Its light-transmitting surface makes it
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - 1.75mm - 800g - Orange
  • Produktid:6523
  • Beskrivelse:If you ever wanted to make things that imitate glass, now it’s the right time. With Z-GLASS, you’re receiving the ability to make an exact replica of your project, even when it comes to translucent structures. Its light-transmitting surface makes it
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - M300 - 1.75 mm - 2 kg - Android Green
  • Produktid:6524
  • Beskrivelse:Material with translucent structure, great for prototypes of products, which are dedicated to be manufactured from glass or translucent plastic. Thanks to light-transmitting surface, Z-GLASS is applicable in automotive, industrial design and architecture
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - M300 - 1.75 mm - 2 kg - Orange
  • Produktid:6525
  • Beskrivelse:Material with translucent structure, great for prototypes of products, which are dedicated to be manufactured from glass or translucent plastic. Thanks to light-transmitting surface, Z-GLASS is applicable in automotive, industrial design and architecture
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - M300 - 1.75 mm - 2 kg - Neon Yellow
  • Produktid:6526
  • Beskrivelse:Material with translucent structure, great for prototypes of products, which are dedicated to be manufactured from glass or translucent plastic. Thanks to light-transmitting surface, Z-GLASS is applicable in automotive, industrial design and architecture
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - M300 - 1.75 mm - 2 kg - Blue
  • Produktid:6527
  • Beskrivelse:Material with translucent structure, great for prototypes of products, which are dedicated to be manufactured from glass or translucent plastic. Thanks to light-transmitting surface, Z-GLASS is applicable in automotive, industrial design and architecture
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-GLASS - M300 - 1.75 mm - 2 kg - Clear
  • Produktid:6528
  • Beskrivelse:Material with translucent structure, great for prototypes of products, which are dedicated to be manufactured from glass or translucent plastic. Thanks to light-transmitting surface, Z-GLASS is applicable in automotive, industrial design and architecture
  • Nypris:1095.00
  • Gl. pris:1095.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Black
  • Produktid:6543
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Grey
  • Produktid:6544
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Natural White
  • Produktid:6545
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Blue
  • Produktid:6546
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Green
  • Produktid:6547
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Red
  • Produktid:6548
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:out of stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-HIPS - 1.75mm - 800g - Yellow
  • Produktid:6549
  • Beskrivelse:Zortrax® developed unique formula of the filament material dedicated for the Zortrax M200® 3D printer. Z-HIPS® is a thermoplastic polymer, high impact resistance allows the use of prototypes enclosures for various types of equipment, starting with housin
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Pure Black
  • Produktid:6559
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Ivory
  • Produktid:6567
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Red
  • Produktid:6568
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Cool Grey
  • Produktid:6569
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Neon Blue
  • Produktid:6570
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Yellow
  • Produktid:6577
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Pastel Yellow
  • Produktid:6578
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse:
  • Forhandler:3DStore.dk
  • Kategorinavn:Filament > Zortrax Filament
  • Brand:
  • Produktnavn:Zortrax Z-ULTRAT - 1.75mm - 800g - Neon Green
  • Produktid:6584
  • Beskrivelse:Z-ULTRAT Versatile material suitable for printing many different types of models. It is perfect for prototyping models with features similar to products manufactured in the injection molding technology. Its also suitable for mechanical and chemical post-
  • Nypris:400.00
  • Gl. pris:400.00
  • Lagerantal:in stock
  • Størrelse: